TC100 Series
(Not available in the U.S. or Canada)
TC100 Quadro TC100 Handy TC 100 Mini

Download PDF Literature


The TC100 Series industrial remote controls are innovative, reliable and ergonomic. With the versatility of three transmitter/controller styles, the TC 100 Series can be easily configured for a wide range of applications.

TC 100 Receiver

  • AC power supply unit 48V, 115V, 230V AC 50/60 Hz
  • DC power supply unit 12V, 24V, 48V DC
  • Synthesiser HF module with Autoscan-function
  • 500 ms passive emergency stop time
  • 2 redundant passive emergency stop circuits
  • Relay switching power 250 V AC / 5A
  • Frequency setting via DIP-switches or Autoscan
  • PC interface for diagnosis
  • System-address with Parity (16 Bit)
  • PG screw connection as standard connection
  • Protection class: IP 65
  • Dimensions WxHxD: 200 x 200 x 70 mm

TC 100-Quadro
The TC 100 Quadro features innovative technology, ease-of-handling and is very lightweight. It is equipped with an integrated antenna, four dual pressure push-buttons, one signal push-button and a mushroom-switch for stop function. In addition, one LED is provided for status and fault indication.

Flexible choice of frequency and receiver designs enables the device to be used in a wide range of applications. The TC 100 Quadro is an inexpensive alternative to cable-based crane and machine controls.

  • The transmission frequency can be set in the range 410 MHz - 490 MHz.
  • The battery is normally recharged with a standard charger unit via the recharging socket on the transmitter housing.
  • The receiver is normally fitted with a PG screw connection.
  • 16 output relays, 14 normally-open contacts and 2 change-over contacts available to user.

TC 100-Handy
The TC100 HANDY combines reliability and user-friendliness by means of intelligent technology and ergonomic design. The transmitter can easily be operated with one hand. The TC100 HANDY is an inexpensive alternative to cable-based crane controls. Innovative technology permits master/slave operation or tandem operation.

Latest synthesizing technology with the "Autoscan" function enables the user to set or adjust frequencies by means of DIP-switches or by a searching function. A carry-pouch with or without a side window is available.

  • LEDīs for status and fault indication
  • 6 dual pressure push-buttons
  • 3 push-buttons
  • Mushroom-head switch, rotating unlocking facility, for stop function
  • Electronic selector switch
  • Key switch (on/off)
  • 2 Replaceable batteries with 0.6 Ah (option 1.6 Ah)
  • 1 Integrated antenna
  • Independent monitoring unit used for monitoring the transmitted address
  • PC interface for diagnosis
  • Synthesiser RF part (frequency setting via DIP switches)
  • 16 output relays, 14 normally-open contacts and 2 change-over contacts available to user.

TC 100-Mini
The TC 100 MINI combines innovative technology with perfect design. The transmitter is robust and ergonomic in design. Synthesizing technology and master/slave or tandem control are standard features of the TC 100 MINI technology. Customized transmitter designs are optionally available in addition to the standard version. The TC 100 MINI is normally supplied with a cushioned waist belt. An Ergonomic Vest Harness is available also as an option.

  • 1 dual axis joystick for 2 drives (2-stage)
  • 1 single axis joystick for 1 drive (2-stage)
  • 1 three-way selector switch
  • 2 push-buttons
  • 1 side-mounted push-button
  • 1 key switch (on/off)
  • 1 mushroom-head switch, rotating unlocking facility, for stop function
  • Integrated antenna
  • PC interface for diagnosis
  • Synthesizer RF part (frequency setting via DIP-switches or Autoscan)
  • LED for status and fault indication
  • Independent monitoring unit used for monitoring the transmitted address
  • 2 Replaceable batteries with 0.6 Ah (option 1.6 Ah)
  • Weight: approx. 1,6 kg
  • Dimensions (WxHxD) MINI : 215 x 136 x 147 mm

TC100 Series Options:

  • Mechanical selector switch for Handy
  • TC 100 Mini Transmitter inside TC 200 EC Transmitter casing
  • Tandem operation (2 Transmitter onto 2 Receiver)
  • Field bus cards: Profi-DP, Interbus-S
  • Relays output via Harting connection
  • Receiver with 9 output relays
  • Receiver with 24 output relays


    Basic Harness Carry-pouch
       
    Ergonomic Vest Harness Ergonomic Vest Harness Battery Charger

 


Copyright© 1997 CATTRON-THEIMEG™. All Rights Reserved. US