Cattron-Theimeg’s toggle-type controller has a unique shape and style that provides the equipment operator with a controller that is durable, lightweight, ergonomic, and convenient. Designed for heavy-duty applications, this controller is ideal for a variety of indoor and outdoor industrial use. The toggle controller employs advanced microcomputer electronics and utilizes surface mount technology. It can be used with all Cattron-Theimeg AT Series or MP Series receiver/decoder units. It can be used with existing systems as either a replacement or as a spare controller.

A variety of synthesized and crystal-controlled RF transmitter configurations can be provided with this controller, allowing operation in the VHF and UHF licensed and non-licensed radio channels. In addition, Cattron-Theimeg’s Toggle controller meets the FCC’s requirements regarding narrowband and 12.5 kHz band widths.

The Cattron-Theimeg Toggle controller has a highly advanced encoder circuit board which is built using industrial grade components, a powerful microcomputer, and sophisticated operating software. All components are protected by a thick-walled, epoxy-coated extruded aluminum case. The ends of the housing are rubberized metal plates that make shock absorbing end "bumpers". This housing carries a lifetime warranty.

Only the highest quality mil-spec toggle switches are used. These switches have gold-plated contacts and a pinned shaft to prevent damage from direct end-on impacts. Their reliability and construction has been field-tested and proven under extreme conditions. Total water and dust sealing makes the entire unit suitable for indoor and outdoor operation.

The Standard Toggle controller can be configured in a variety of ways and can include pushbuttons or paddles to meet the user’s requirements. All functions are identified by durable custom engraved faceplates.

A large safety bar is provided to function as an enabling device to all toggle switches. This large bar is easily and naturally activated by the palm of the operator's hand any time he places his hand into position to move the toggle switches. This push-to-operate (PTO) safety bar will electronically disconnect all lever switches when it is released, thus stopping motion commands from these switches. This feature is programmable. Certain applications may have some toggle switches removed from the control of the PTO bar.

Cattron-Theimeg Paddle controllers are equipped with a tilt switch to activate diagnostics and can be optionally programmed to send a function. This function can be assigned in the decoder for a variety of operations, i.e., to stop the equipment, sound an alarm or both. Every Paddle controller may also be equipped with an optional PC-compatible diagnostic port.

Cattron-Theimeg Paddle controllers are powered with disposable Alkaline or rechargeable Ni-Cad batteries. In normal operation, a green LED blinks with each function command message. For added safety and improved performance, the operating voltage is regulated over the entire battery life, insuring constant range and reliable operation. When the battery voltage becomes low, the green LED will change to red, and a beeping sound will alert the operator that the battery needs to be changed or recharged. Whether you choose disposable or rechargeable batteries, changing the battery is easy - simply open the gasketed battery cover, drop the battery in place and close the cover. There are no wires or connectors to insert into the battery.

• FCC Narrowband-compliant models available
• Intrinsically safe models available
• For use with any Cattron-Theimeg AT or MP Series System
• Customized layout with custom-engraved nameplates
• Rugged, ergonomic design for use in harsh environments
• Power-on self-diagnostics
• Two stage LED battery indicator with audible beep.
• Long battery life; full voltage regulation over life of the battery
• State-of-the-art industrial grade components and advanced microcomputer technology
• Epoxy-coated aluminum housing with Lifetime Warranty
• Rubberized end caps & switch guards to absorb heavy shocks
• Large push-to-operate (PTO) safety bar
• Designed for easy servicing

Case Material: Epoxy-coated aluminum extrusion with molded rubber end caps

Dimensions: Approx. 9.8"H x 3.6" W x 4.1"D (25cm x 9.1cm x 10.4cm)

Weight: With battery – 3.0lbs. (1.3kg)

Number of Functions: Up to 40 digital and/or 2 analog

Switch Choices: A wide variety – Toggle, Pushbutton, Paddle, Rotary, etc.

Keylock Switch: Optional (power on/off)

Antenna: Internal standard or external optional

Environmental: -22ºF to +140ºF (-30ºC to +60ºC) indoor/outdoor use; contact Cattron for extremes

Battery Voltage: 12.5VDC nominal

Radio Transmitters: UHF and VHF, pulsed packet data, FSK

Type Approvals: USA, Canada, UK, South Africa, Brazil; for a complete listing, contact Cattron-Theimeg.

Power Output: Variable – dependent upon application requirements and licensing limitations

Emission/Modulation: 14K0F1D +/-5KHz deviation; 9K0F1D +/-2.5KHz deviation (narrowband)

Operating Range: From approximately 300 ft (93m) to 5000 ft (1540m). These distances assume line of sight operation and are dependent on power, frequency, antenna, and type of receiver/decoder used.

Battery Selection: Long-life alkaline or rechargeable Ni-Cad. Battery life dependent upon application. Please contact Cattron-Theimeg for additional information.

Carrying Case: Optional shoulder strap and/or swivel belt clip, can also be used with Ergonomic Vest Harness.

* specifications subject to change without notice.